130 results
Filters
Settings
Now showing1 - 10 of 130
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Assessment of ion-exchange membrane adsorber and granular activated carbon for precursors removal of regulated THMs and novel sulfonated DBPs(Elsevier, 2026-10-23); ; ;Kahle, Laura; Chlorination is widely used to ensure microbial safety in drinking water, but also leads to the formation of potentially harmful disinfection byproducts (DBPs). DBP precursor removal is the most effective way to reduce their formation. Regulations often assume that reducing certain regulated DBPs, such as trihalomethanes (THMs), also reduces other unregulated DBPs. However, recent studies have shown that formation of novel sulfonated DBPs (sDBPs), a class of highly polar DBPs widely detected in disinfected tap water, can be decoupled from regulated THM formation, likely due to differences in their precursor compounds. In this study, we investigated the removal of natural organic matter (NOM), the primary DBP precursor, from ground- and surface waters using an anion-exchange membrane adsorber (AEX-MA) and conventional granular activated carbon (GAC). In humic-rich water, dissolved organic carbon (DOC) reduction was higher after AEX-MA treatment (∼85%), while GAC reduced DOC by only 43%. In contrast, for waters with more low-molecular-weight and non-polar compounds, GAC removal was higher at about 61%, than AEX-MA, which removed around 32% DOC. Both methods synergistically reduced the formation of THMs and sDBPs by up to 93% and 84%, respectively. Limited bromide removal led to shifts in Br⁻:DOC ratios after treatment, resulting in increased bromide incorporation into the DBPs. Reductions in chlorinated THM and sDBP species closely correlated with bulk DOC removal, indicating effective removal of precursors for both. CHOS-containing NOM, a potential sDBP precursor class of NOM compounds, was not preferentially removed by either treatment. Overall, although sDBP formation can be decoupled from THMs in untreated waters, bulk NOM removal reduces both, indicating that AEX-MA and GAC as THM-targeted treatment strategies may also reduce sDBP formation.Publicationtype: Journal Article5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Adsorption behavior of lead and chromium onto MgO impregnated biochar derived from banana peels and rice husk in binary environment(Nature Publishing Group, 2026-07-16) ;Kanwal, Tayyaba; ; ;Lee, Kang HoonIn current research, raw- and MgO-impregnated biochar derived via (co)pyrolysis of rice husk (RH) and banana peel (BP) in mass ratios (0:1, 1:0 and 1:1) were synthesized and examined for their physiochemical properties and adsorption performance for Cr(VI) and Pb(II) ions removal from synthetic solutions. Owing to excellent removal capability (Cr(VI): 94% at pH 2; Pb(II): 100% at pH 4) of 2 g/L MgO-impregnated biochar with mass ratio 1:1 (MgO@CBC) for 20 mg/L metals ions loading in single solute system with 120 min contact time, removal performance of MgO@CBC was examined under binary environment. Interestingly, binary solute system showed significant MgO@CBC adsorption performance for Pb(II) removal (99%) with slight decrease in Cr(VI) removal (88.5%) at pH 2 under similar boundary conditions. Moreover, increasing metal ions concentration showed improved MgO@CBC adsorption potential for Cr(VI) at pH 4 and Pb(II) at pH 2, due to porous matrix Mg 2+ -mediated compounds and unique surface characteristics. Furthermore, the underlying removal mechanism using MgO@CBC was identified as (Cr(VI): reduction/complexation coupled with electrostatic attraction) and (Pb(II): ligand exchange followed by surface complexation) and in binary system as (Cr(VI) and Pb(II): ligand exchange, electrostatic attraction, bimetallic bonding (Pb–O–Cr) and surface complexation). In addition, MgO@CBC displayed promising recyclability potential for metal ions removal up to five cycles. In general, these experimental and mechanistic insights may provide feasible and ecofriendly solutions to tanneries, when dealing with toxic metal ions from their effluents.Publicationtype: Journal Article12 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: without files , Entwicklung der Trinkwasseraufbereitung in Deutschland seit Anfang des 20. Jahrhunderts(Wiley, 2026-06-11) ;Czekalla, Christoph; ; ; Winzenbacher, RudiDie Geschichte der Trinkwasseraufbereitung ist nicht nur eine Abfolge technischer Innovationen, sondern ein Spiegel wissenschaftlicher Debatten, gesellschaftlicher Lernprozesse und nicht zuletzt persönlicher Überzeugungsarbeit engagierter Menschen. Die Wasserchemische Gesellschaft hat den Entwicklungsweg seit nunmehr hundert Jahren begleitet und wissenschaftlich geprägt. Der vorliegende Beitrag möchte den Weg nachzeichnen – sachlich fundiert, aber auch mit Blick auf Menschen und Kontroversen, die den Fortschritt erst möglich machten.Publicationtype: Journal Article15 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: without files , Adsorption behavior of Selenium oxyanions on granular ferric hydroxide in sources of drinking waterElevated selenium (Se) levels in drinking water pose significant health risks, necessitating effective removal strategies. This study evaluates granular ferric hydroxide (GFH) for Se oxyanion removal under varying water chemistries. GFH showed higher removal efficiency for Se(IV) (99.31 %) than Se(VI) (88.41 %), with minimal iron dissolution, indicating that performance differences arise from distinct Se–GFH interaction mechanisms. Se(IV) adsorption followed pseudo‐first‐order kinetics and the Langmuir isotherm, whereas Se(VI) was better described by pseudo‐second‐order kinetics and the Freundlich model. Sulfate and silicate exhibited a stronger inhibitory effect on Se(VI) removal than on Se(IV), highlighting challenges in treating selenate‐contaminated waters. These findings improve understanding of Se oxyanion adsorption on GFH and support its application in drinking water treatment.Publicationtype: Journal Article13 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Machine learning-driven optimization of biochar-based supercapacitors for sustainable energy storage: mechanisms, trends, and perspectives(Elsevier, 2026-03-31); ; ; ; Haider, SalmanGlobal transition toward sustainable and efficient energy storage has intensified research into supercapacitors, valued for their rapid charge-discharge capability, high power density, and long operational lifespan. Among carbonaceous materials, biomass-derived biochar has emerged as a low-cost, renewable, and structurally tunable precursor for electrode design. This review provides a structured and critical synthesis of biochar-based supercapacitor strategies, systematically categorizing heteroatom doping, nanocomposite engineering, and hybrid architecture within an integrated electrochemical performance framework. Unlike existing literature that predominantly summarizes modification approaches, this review emphasizes cross-study comparability, mechanistic attribution, and device-level relevance to clarify transferable design principles. A consolidated analysis of recent machine learning (ML) applications reveals a paradigm shift from empirical optimization to data-driven predictive design. Benchmarking against reported datasets, descriptors, and model architectures, we confirm that tree-based ensemble and neural-network models (e.g., XGBoost, LightGBM, ANN) consistently achieve high predictive accuracy (R² > 0.9), while also identifying current limitations in data standardization and descriptor harmonization. The review critically evaluates how ML can move beyond correlation towards interpretable and transferable optimization under realistic device constraints.Finally, a converging research roadmap is proposed, prioritizing standardized reporting, device-level benchmarking, and constraint-aware ML integration to accelerate scalable implementation. By integrating materials engineering, data-driven modeling, and practical deployment considerations, this review establishes a comprehensive framework for advancing sustainable biochar-based supercapacitors toward real-world energy storage applications.Publicationtype: Review Article32 24 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Removal of bacteriophages MS2 and ΦX174 in biotic iron and manganese filters and in ultrafiltration of iron and manganese containing backwash water(Elsevier, 2026-03-14); ; ; ;Förster, ChristinaViruses pose risks to human health and might be of special concern in filter backwash water recycling, yet there are no published studies on the subject. The fate of the bacteriophages MS2 and ΦX174 during biological filtration was studied at pilot scale. Furthermore, the efficacy of phage removal in ultrafiltration of filter backwash water was investigated for four different ultrafiltration (UF) membranes at laboratory scale. During biotic iron and manganese removal from groundwater (2.1–2.7 mg/L Fedis and 0.4–0.7 mg/L Mndis), both phages were removed by less than one log10 unit at filtration velocities of 7.5 m/h and 15.0 m/h. Treatment of filter backwash water (3.9–7.9 mg/L Fetotal) with a polyether sulfone flat-sheet UF membrane (pore size 26 nm) yielded a removal of MS2 phages of 4 log10 units and of ΦX174 of approx. 3 log10 units. Using different UF membranes revealed no clear relation between pore size and phage retention, with phage retention reaching up to 7 log10 units with pore sizes larger than phage diameters.Publicationtype: Journal Article36 17 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Electrochemical regeneration of macroporous anion exchange membrane Adsorbers for the removal of natural organic matter (NOM)The removal of Natural Organic Matter (NOM), a major precursor to potentially toxic disinfection by-products, is a challenge in water treatment. Porous anion-exchange (AEX) membrane adsorbers (MAs) combine convective transport and selective adsorption, offering a promising approach. However, conventional AEX regeneration relies on chemical treatments that generate secondary waste. This study presents a sustainable, chemical-free regeneration method using localized electrochemical pH modulation via the oxygen reduction reaction (ORR) at a graphite felt electrode near planar MAs. Electrochemical analysis identified an optimal potential window (+100 to 1000 mV vs. Ag/AgCl), enabling localized alkalinization with minimal hydrogen evolution. Regeneration efficiencies ranged from 20 to 60% for groundwater (GW), surface water (SW), and model NOM compounds under standard conditions, with highest values observed for GW and SW. A flux of 100 LMH ensured best mass transport for oxygen during ORR, and higher pH promoted alkaline deprotonation of weak basic AEX, enhancing regeneration. Under optimized conditions with elevated pH 10 efficiencies reached up to 77 ± 6% regeneration of UV254 active NOM and 85 ± 4% TOC, respectively. Cyclic operation was successful despite mainly initial irreversible fouling and minor loss thereafter. This electrochemical approach has the potential to extend MA lifespan and postpone disposal or chemical regeneration. The additional energy requirement is low, at 0.02 kWh per m3 treated water. Overall, this chemical-free, energy-efficient method represents a potentially more sustainable NOM removal via AEX MAs.Publicationtype: Journal Article27 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Formation of regulated and novel disinfection by-products during chlorine and chlorine dioxide disinfection of surface water and groundwater(Elsevier, 2026-02-15); ; ;Stefanoni, Mattia ;Kahle, LauraThe formation of disinfection by-products (DBPs) during water disinfection is a health concern. A limited number of DBPs, such as trihalomethanes (THMs), are regulated and used as indicators of human exposure to the broader group of DBPs. However, it remains poorly understood whether the formation mechanisms and precursors of unregulated DBPs are similar to that of regulated ones. In this study, lab-scale chlorination and chlorine dioxide (ClO₂) disinfection were conducted on four different source waters (two surface water and two groundwaters). DBP formation was assessed through targeted analysis of THMs via gas chromatography-mass spectrometry, novel sulfonated DBPs via supercritical fluid chromatography-mass spectrometry, and non-targeted analysis using liquid chromatography coupled to Fourier transform ion cyclotron resonance mass spectrometry (LC-FT-ICR-MS). The formation of THMs during chlorination was higher in surface waters (49–111 µg per mg dissolved organic carbon, DOC, at 48 h) than in groundwaters (21–27 µg per mg DOC) and corresponded to their higher initial specific UV-absorbance (SUVA₂₅₄) and higher humic acid fractions as determined by LC-organic carbon detection. ClO₂ disinfection led to significantly lower THM levels (below the limit of detection of 0.20 µg/L) across all samples. Similarly, the formation of sulfonated DBPs was one order of magnitude lower. However, unlike THMs, sulfonated DBPs were formed to a greater extent in both groundwaters (3.0–3.6 µg per mg DOC) than in surface waters (2.0–2.2 µg per mg DOC), suggesting that sulfonated DBPs are preferentially formed from other precursors than THMs. This was further elucidated by LC-FT-ICR-MS analysis showing that the higher levels of sulfur- and nitrogen- containing dissolved organic matter in the studied groundwater samples likely contributed to the increased formation of sulfonated DBPs. Furthermore, LC-FT-ICR-MS analysis outlined that disinfection by ClO₂, while reducing halogenated DBPs, resulted in even higher levels of non-chlorinated, sulfur- and nitrogen-containing DBPs. In conclusion, strategies focused on reducing regulated THMs may be insufficient to mitigate the formation of sulfonated and other novel heteroatom-containing DBPs during drinking water treatment.Publicationtype: Journal Article42 19 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Compost organic matter content varied five-fold and determined compost quality across 107 composts of the North Sea Region(Elsevier, 2026-01-15); ; ;Vandaele, Elke ;Smeets, HansComposting is a widely used method to process organic waste residues. It results in a valuable product for soil application and use in growing media. The aim of this study was to investigate the variation in characteristics of composts produced in the North Sea Region, and the factors determining this variation. A total of 107 composts were categorized into two composting practices (produced on a farm or on a commercial composting facility) and three feedstock groups (manure combined with other wastes; green waste; fruit, vegetable and garden waste (fvg)), and measured for 67 physical, chemical and biological characteristics. Variation in the results was large, e.g., up to a factor 20 and 11 for total microbial biomass and potassium content, respectively, underlining the importance of compost characterization to target the intended compost use. Organic matter (OM) content varied between 14 and 73% of dry matter and was larger for Belgian composts compared to composts from The Netherlands, Denmark, Germany and Scotland. The OM content was positively correlated with total microbial biomass, cation exchange capacity and content of nitrogen (N) and phosphorus (P) of composts. Farm composts, irrespective of the OM effect, exhibited higher total microbial biomass compared to commercial composts. Compost prepared from green waste had lower N and P contents compared to compost prepared from fvg or manure waste. The study documents characteristics in composts from diverse composting practices and feedstocks, providing a benchmark and enabling targeted improvements as a first step towards tailormade compost.Publicationtype: Journal Article34 20 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , The role of residual Hydrogen Peroxide for biological applications of polymeric N-oxides(Wiley, 2026-01-15) ;Kobus, Michelle ;Mesgarha, Shirin ;Moretto, Erica; Polymers with N-oxide groups find applications in the biomedical field because they are highly hydrated in water, are considered to be nontoxic, and have stealth properties. Additional antimicrobial activity of polymeric N-oxides has also been reported, and it is currently unclear if this activity is a general feature of polymeric N-oxides or a special property of selected derivatives. N-Oxides are often prepared by oxidation of tertiary amines with hydrogen peroxide, which is notoriously difficult to remove from the resulting polymeric N-oxides. This study analyzes the role of residual oxidant in polymeric N-oxides for antimicrobial activity. Sensitive quantification reveals a significant release of hydrogen peroxide from oxidized polymers in solution and grafted on polyethylene or polyamide. The release of hydrogen peroxide from these polymers can lead to concentrations exceeding the minimum inhibitory concentrations (MICs) for Staphylococcus aureus and Escherichia coli. It can thus compromise microbiological assays. Rigorous removal of hydrogen peroxide leads to polymeric N-oxides with no antibacterial activity. Antibacterial effects of polymeric N-oxides against planktonic bacteria are primarily attributed to residual hydrogen peroxide, rather than to the intrinsic activity of the N-oxide functionality. Poly(N-oxide)-modified surfaces are therefore inert low-fouling materials with tunable, transient antibacterial functionality through controlled hydrogen peroxide release.Publicationtype: Journal Article18 18