Please use this identifier to cite or link to this item: https://doi.org/10.15480/882.1966
This item is licensed with a CreativeCommons licence by-nc-nd/4.0
DC FieldValueLanguage
dc.contributor.authorMöller, Mauritz-
dc.contributor.authorBaramsky, Nicolaj-
dc.contributor.authorEwald, Ake-
dc.contributor.authorEmmelmann, Claus-
dc.contributor.authorSchlattmann, Josef-
dc.date.accessioned2019-01-11T07:00:04Z-
dc.date.available2019-01-11T07:00:04Z-
dc.date.issued2016-
dc.identifier.citationPhysics Procedia (83): 733-742 (2016-01-01)de_DE
dc.identifier.issn1875-3892de_DE
dc.identifier.urihttps://tubdok.tub.tuhh.de/handle/11420/1969-
dc.description.abstractAdditive Metal Deposition (AMD) is an additive manufacturing process building parts based on a nozzle-fed powder by laser assisted solidification. The AMD technology offers unique advantages for the production of near net-shape parts. In contrast to the powder bed-based technologies it provides a high productivity grade. Today AMD lacks reproducible process strategies manufacturing large parts in narrow tolerances. The building height of a single layer and the geometrical shape of a whole part alter progressively with increasing part dimensions - consecutively leading to a higher effort in the manufacturing-process development for such parts. To reduce this effort, in this paper first an iterative identification of optimal process parameters is performed by following an evolutionary algorithm under varied BC. Based on the geometry-related parameter sets, tolerances are defined. The process strategies and tolerances are validated for a prototype application considering the defined quality aims. Finally the results are discussed and summarized in an a-priori process design guideline for AMD Ti6Al4V-parts.en
dc.language.isoende_DE
dc.publisherElsevierde_DE
dc.relation.ispartofPhysics procediade_DE
dc.rightsinfo:eu-repo/semantics/openAccess-
dc.subjectadditive manufacturingde_DE
dc.subjecttitaniumde_DE
dc.subjectdesign guidelinede_DE
dc.subjectevolutionary algorthmsde_DE
dc.subject.ddc600: Technikde_DE
dc.titleEvolutionary-based design and control of geometry aims for AMD-manufacturing of Ti-6Al-4V partsde_DE
dc.typeArticlede_DE
dc.identifier.urnurn:nbn:de:gbv:830-882.025556-
dc.identifier.doi10.15480/882.1966-
dc.type.diniarticle-
dc.subject.ddccode600-
dcterms.DCMITypeText-
tuhh.identifier.urnurn:nbn:de:gbv:830-882.025556-
tuhh.oai.showtruede_DE
dc.identifier.hdl11420/1969-
tuhh.abstract.englishAdditive Metal Deposition (AMD) is an additive manufacturing process building parts based on a nozzle-fed powder by laser assisted solidification. The AMD technology offers unique advantages for the production of near net-shape parts. In contrast to the powder bed-based technologies it provides a high productivity grade. Today AMD lacks reproducible process strategies manufacturing large parts in narrow tolerances. The building height of a single layer and the geometrical shape of a whole part alter progressively with increasing part dimensions - consecutively leading to a higher effort in the manufacturing-process development for such parts. To reduce this effort, in this paper first an iterative identification of optimal process parameters is performed by following an evolutionary algorithm under varied BC. Based on the geometry-related parameter sets, tolerances are defined. The process strategies and tolerances are validated for a prototype application considering the defined quality aims. Finally the results are discussed and summarized in an a-priori process design guideline for AMD Ti6Al4V-parts.de_DE
tuhh.publisher.doi10.1016/j.phpro.2016.08.075-
tuhh.publication.instituteLaser- und Anlagensystemtechnik G-2de_DE
tuhh.identifier.doi10.15480/882.1966-
tuhh.type.opus(wissenschaftlicher) Artikelde
tuhh.institute.germanLaser- und Anlagensystemtechnik G-2de
tuhh.institute.englishLaser- und Anlagensystemtechnik G-2de_DE
tuhh.gvk.hasppnfalse-
openaire.rightsinfo:eu-repo/semantics/openAccessde_DE
dc.type.driverarticle-
dc.rights.ccby-nc-ndde_DE
dc.rights.ccversion4.0de_DE
dc.type.casraiJournal Articleen
tuhh.container.volume83de_DE
tuhh.container.startpage733de_DE
tuhh.container.endpage742de_DE
dc.relation.conference9th International Conference on Photonic Technologies - LANE 2016de_DE
dc.rights.nationallicensefalsede_DE
item.fulltextWith Fulltext-
item.creatorOrcidMöller, Mauritz-
item.creatorOrcidBaramsky, Nicolaj-
item.creatorOrcidEwald, Ake-
item.creatorOrcidEmmelmann, Claus-
item.creatorOrcidSchlattmann, Josef-
item.creatorGNDMöller, Mauritz-
item.creatorGNDBaramsky, Nicolaj-
item.creatorGNDEwald, Ake-
item.creatorGNDEmmelmann, Claus-
item.creatorGNDSchlattmann, Josef-
item.grantfulltextopen-
crisitem.author.deptLaser- und Anlagensystemtechnik G-2-
crisitem.author.deptLaser- und Anlagensystemtechnik G-2-
crisitem.author.deptLaser- und Anlagensystemtechnik G-2-
crisitem.author.deptLaser- und Anlagensystemtechnik G-2-
crisitem.author.deptLaser- und Anlagensystemtechnik G-2-
crisitem.author.orcid0000-0003-3505-0369-
crisitem.author.orcid0000-0003-4290-8781-
Appears in Collections:Publications (tub.dok)
Files in This Item:
File Description SizeFormat
1-s2.0-S1875389216301821-main.pdfVerlags-PDF1,41 MBAdobe PDFView/Open
Show simple item record

Page view(s)

57
Last Week
3
Last month
2
checked on Apr 21, 2019

Download(s)

13
checked on Apr 21, 2019

Google ScholarTM

Check

Export

This item is licensed under a Creative Commons License Creative Commons