DC FieldValueLanguage
dc.contributor.authorSchütt, Martin-
dc.contributor.authorKarsten, Julian-
dc.contributor.authorSchott, L.-
dc.contributor.authorWittich, Hans-
dc.contributor.authorSchulte, Karl-
dc.contributor.authorFiedler, Bodo-
dc.date.accessioned2019-05-27T13:41:27Z-
dc.date.available2019-05-27T13:41:27Z-
dc.date.issued2019-06-
dc.identifier.citationCEAS Aeronautical Journal 2 (10): 565-587 (2019-06)de_DE
dc.identifier.issn1869-5582de_DE
dc.identifier.urihttp://hdl.handle.net/11420/2720-
dc.description.abstractThis paper presents a detailed experimental study on carbon fibre (CF) polyether etherketone (PEEK) composite fasteners designed to join conventional high performance composites (CFRP). The failure mechanisms of two CF-PEEK fasteners with countersunk heads joining two laminate plates in a single-lap configuration were investigated under static (tensile) and cyclic loading (tension–tension). The failure process of the bolted joints is described in detail using acoustic emission and microscopic cut views. For comparison the CF-PEEK fasteners were replaced by metal fasteners (Titanium) under the corresponding conditions and loadings. The experimental results are in good agreement with the newly developed “closed-form” model up to the damage point of the joints. This enhanced analytical approach is a closed-form extension of the spring-based method, where bolts and laminates are represented by an arrangement of springs and masses. The model covers in all variables influencing the joint behaviour, such as fastener position, joint material, fastener type, hole diameter, joint thickness, bolt-hole clearance, and bolt torque.en
dc.language.isoende_DE
dc.relation.ispartofCEAS Aeronautical Journalde_DE
dc.titleExperimental and analytical study of an CF-PEEK Fastener all composites single-lap shear joint under static and fatigue loadingde_DE
dc.typeArticlede_DE
dc.identifier.urnurn:nbn:de:gbv:830-882.035493-
dc.type.diniarticle-
dcterms.DCMITypeText-
tuhh.identifier.urnurn:nbn:de:gbv:830-882.035493-
tuhh.abstract.englishThis paper presents a detailed experimental study on carbon fibre (CF) polyether etherketone (PEEK) composite fasteners designed to join conventional high performance composites (CFRP). The failure mechanisms of two CF-PEEK fasteners with countersunk heads joining two laminate plates in a single-lap configuration were investigated under static (tensile) and cyclic loading (tension–tension). The failure process of the bolted joints is described in detail using acoustic emission and microscopic cut views. For comparison the CF-PEEK fasteners were replaced by metal fasteners (Titanium) under the corresponding conditions and loadings. The experimental results are in good agreement with the newly developed “closed-form” model up to the damage point of the joints. This enhanced analytical approach is a closed-form extension of the spring-based method, where bolts and laminates are represented by an arrangement of springs and masses. The model covers in all variables influencing the joint behaviour, such as fastener position, joint material, fastener type, hole diameter, joint thickness, bolt-hole clearance, and bolt torque.de_DE
tuhh.publisher.doi10.1007/s13272-018-0334-z-
tuhh.publication.instituteKunststoffe und Verbundwerkstoffe M-11de_DE
tuhh.type.opus(wissenschaftlicher) Artikel-
tuhh.institute.germanKunststoffe und Verbundwerkstoffe M-11de
tuhh.institute.englishKunststoffe und Verbundwerkstoffe M-11de_DE
tuhh.gvk.hasppnfalse-
dc.type.driverarticle-
dc.type.casraiJournal Article-
tuhh.container.issue2de_DE
tuhh.container.volume10de_DE
tuhh.container.startpage565de_DE
tuhh.container.endpage587de_DE
item.grantfulltextnone-
item.creatorGNDSchütt, Martin-
item.creatorGNDKarsten, Julian-
item.creatorGNDSchott, L.-
item.creatorGNDWittich, Hans-
item.creatorGNDSchulte, Karl-
item.creatorGNDFiedler, Bodo-
item.languageiso639-1other-
item.fulltextNo Fulltext-
item.creatorOrcidSchütt, Martin-
item.creatorOrcidKarsten, Julian-
item.creatorOrcidSchott, L.-
item.creatorOrcidWittich, Hans-
item.creatorOrcidSchulte, Karl-
item.creatorOrcidFiedler, Bodo-
crisitem.author.deptKunststoffe und Verbundwerkstoffe M-11-
crisitem.author.deptKunststoffe und Verbundwerkstoffe M-11-
crisitem.author.deptKunststoffe und Verbundwerkstoffe M-11-
crisitem.author.deptKunststoffe und Verbundwerkstoffe M-11-
crisitem.author.deptKunststoffe und Verbundwerkstoffe M-11-
crisitem.author.orcid0000-0002-8243-4114-
crisitem.author.orcid0000-0001-6521-0488-
crisitem.author.orcid0000-0002-2734-1353-
crisitem.author.parentorgStudiendekanat Maschinenbau-
crisitem.author.parentorgStudiendekanat Maschinenbau-
crisitem.author.parentorgStudiendekanat Maschinenbau-
crisitem.author.parentorgStudiendekanat Maschinenbau-
crisitem.author.parentorgStudiendekanat Maschinenbau-
Appears in Collections:Publications without fulltext
Show simple item record

Page view(s)

39
Last Week
2
Last month
13
checked on Jul 23, 2019

Google ScholarTM

Check

Export

Items in TORE are protected by copyright, with all rights reserved, unless otherwise indicated.