Song, ShiShiSongEhlers, SörenSörenEhlersvon Bock und Polach, Rüdiger Ulrich FranzRüdiger Ulrich Franzvon Bock und PolachBraun, MoritzMoritzBraun2024-12-102024-12-102024-11-29Marine Structures 100: 103732 (2025)https://hdl.handle.net/11420/52404Ultra-low cycle fatigue (ULCF) refers to material failure at small number of loading cycles. For large complex structures like ships, the damage from ULCF can bring hazardous consequences. In this study, an alternately-cyclically loaded four-point bending test of a large box girder is introduced as the specimen to represent the ULCF of ship hull structure. In every load during the test, large deformation is applied to the specimen even after reaching its ultimate hull girder strength (UHGS), thus extensive plastic deformation and obvious fracture can occur in the specimen. The severely damaged specimen is further tested until 1.5 cycles of bending are finished, thus the test of post-damage box girder is realized. Moreover, the box girder is divided into 3 sub-sections, which show different but still interacting structural behavior. The result of the test shows the structural behavior of a large complex structure suffering severe damage during alternate hogging and sagging after reaching its UHGS, which corresponds to the consequence of ULCF. The presented ULCF test also provides experiences for investigations of large complex structures with existing damages or after accidental loads. Considering the number of cycles in the test, this study can bridge the gap between monotonic overload and ultra-low cycle fatigue.en0951-8339Marine structures2024Elsevierhttps://creativecommons.org/licenses/by/4.0/4-point bending | Large complex structure | Large scale test | Ship structure | Steel structure | Ultra-low cycle fatigueTechnology::620: Engineering::620.1: Engineering Mechanics and Materials ScienceTechnology::624: Civil Engineering, Environmental Engineering::624.1: Structural EngineeringUltra-low cycle fatigue of ship hull structure: an alternately-cyclically loaded four-point bending test of a large box girderJournal Articlehttps://doi.org/10.15480/882.1388310.1016/j.marstruc.2024.10373210.15480/882.13883Journal Article