3D printing of continuous Carbon fiber-reinforced polymer tee pipe: Strategy development and demonstrator fabrication

Conventional manufacturing techniques for continuous carbon fiber-reinforced polymers (CFRP) rely on costly, geometry-specific molds, which substantially limit design flexibility. To overcome these constraints, this paper proposes a robot-based, multi-axis Fused Filament Fabrication (FFF) approach for the production of CFRP components of complex geometries. The setup enables advanced material placement so that support structures and internal cores can be avoided, thereby reducing process preparation effort, post-processing requirements, and overall manufacturing cost. As a case study, a tee pipe geometry is investigated. A dedicated slicing strategy is developed in which the main pipe and the branching section are fabricated sequentially. This approach requires precise cutting and controlled re-adhesion of the CFRP material, a critical capability for extending conventional neat-polymer FFF processes to the additive manufacturing of CFRP. Experimental validation demonstrated the feasibility of the process, highlighting the critical role of an innovative technique called nozzle ironing for surface preparation, as well as the challenges associated with fiber cutting mechanisms. While the final component achieved structural coherence, leakage testing revealed porosity at specific interface regions, suggesting directions for future hardware refinement and process optimization.

DDC Class

670: Manufacturing

620.11: Engineering Materials

Lizenz

https://creativecommons.org/licenses/by/4.0/

Publication version

publishedVersion

Name

KEM.1047.277-1.pdf

Type

Main Article

Size

809.41 KB

Format

Adobe PDF

Options

3D printing of continuous Carbon fiber-reinforced polymer tee pipe: Strategy development and demonstrator fabrication