Additive manufactured versus traditional osteosynthesis plates : a finite element analysis

Journal
Transactions on additive manufacturing meets medicine  
Volume
4
Issue
1
Article Number
644
Citation
Transactions on additive manufacturing meets medicine 4 (1): 644 (2022)
Publisher DOI
10.18416/AMMM.2022.2209644
Publisher
Infinite Science GmbH
Peer Reviewed
true
Additive Manufacturing (AM) is rapidly gaining acceptance in healthcare. Due to 3D printing of polyetheretherketone (PEEK) constructions almost any complex geometry, e. g. bio-mimicking implants or light-weight hollow implant bodies, can be produced. In this paper a direct comparison between PEEK and titanium osteosynthesis plates is achieved with a finite element analysis. By that, pros and cons of PEEK as implant material are discussed and different use cases are identified. For the comparison a generic osteosynthesis plate for diaphysis is designed. The exceeding of the yield strength even at low bending and torsional loads highlights the problems that occur when applying PEEK implants at locations which are affected by moderate mechanical loads. Since fracture stabilisation is the main function of osteosynthesis plates, stiffness is a highly relevant property of these. Therefore, a direct exchange of titanium to PEEK would increase the risk of non-union. Thus, a different structure or an improved material, e. g. carbon fibre PEEK composite, is required for loaded locations to replace metallic implants.
Subjects
osteosynthesis implant
osteosynthesis
Additive Manufacturing
fem analysis
DDC Class
570: Biowissenschaften, Biologie
600: Technik
610: Medizin
620: Ingenieurwissenschaften
Publication version
publishedVersion
Lizenz
https://creativecommons.org/licenses/by/4.0/
Publisher‘s Creditline
© 2022 Tobias Barth; licensee Infinite Science Publishing
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Loading...
Thumbnail Image
Name

Additive manufactured versus traditional osteosynthesis plates - a finite element analysis, Barth, 2022.pdf

Size

583.45 KB

Format

Adobe PDF