Development and assessment of a methodology for abstraction of topology optimization results to enable the substitution of optimized beams

Improving mechanical topology optimization (TO) results by substituting biomimetic beams is one possibility to achieve designs of mechanical components that are highly sustainable and show good mechanical performance. Because of their geometric complexity, such designs were found to be well-suited for production by laser additive manufacturing. One obstacle of incorporating biomimetics beams in TO designs is the lack of detailed design methodologies. Röver et al. [“Methodology for integrating biomimetic beams in abstracted topology optimization results,” in Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity Columbus, OH, 30 October-3 November (ASME, New York, 2022)] proposed a corresponding design concept. Building on their concept, we present in this work a detailed methodology for abstraction of TO results to a design consisting of ball nodes and cylindrical beams. Using such an auxiliary design, the internal forces and moments of the beams can be evaluated to allow for the substitution of suitable biomimetic beams to generate biomimetic component designs in a next step. We present a skeletonization algorithm based on the potential field approach. Using the skeletonization and an additional analysis of the dimensions of the beams in the TO result, the algorithm develops an auxiliary design of the original TO result. The final algorithm was applied to three common TO results to obtain one auxiliary component design each. The developed algorithm was found to generate abstractions that were well-suited for use in the methodology proposed in Röver et al. [“Methodology for integrating biomimetic beams in abstracted topology optimization results,” in Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity Columbus, OH, 30 October-3 November (ASME, New York, 2022)], because internal forces and moments in the abstracted beams could be evaluated with less effort. Therefore, our work contributes to a detailed design methodology for biomimetic mechanical components in the field of design for additive manufacturing.

Subjects

biomimetics

design for additive manufacturing (DfAM)

design optimization

finite element analysis

generative design

PBF-LB/M

skeletonization

topology optimization

DDC Class

620: Engineering

Publication version

publishedVersion

Lizenz

https://creativecommons.org/licenses/by/4.0/

Name

042061_1_7.0001185(1).pdf

Type

Main Article

Size

2.05 MB

Format

Adobe PDF

Options

Development and assessment of a methodology for abstraction of topology optimization results to enable the substitution of optimized beams