|Publisher DOI:||10.1121/2.0001480||Title:||Validation of a 3D pile driving noise model with noise mitigation measures||Language:||English||Authors:||von Pein, Jonas
von Estorff, Otto
|Issue Date:||2021||Source:||Proceedings of Meetings on Acoustics 44 (1) : 2021)||Journal:||Proceedings of Meetings on Acoustics : POMA / Acoustical Society of America||Abstract (english):||
Piles are the state-of-the-art foundation for offshore wind structures. The piling process leads to high sound pressure levels in the water reaching levels that are potentially harmful to the marine life. Numerical models are used to predict the sound pressure levels and to optimize the sound mitigation set-up prior to construction. Such models are often based on a hybrid modelling approach with a close-range and a far- range model. Thereby, the close-range model is used to derive the starting field for the far-range model. Often, the close-range model is based on the finite element method (FEM). Far-range models usually use underwater acoustics propagation models such as the parabolic equation (PE) modelling approach. Within this contribution, a hybrid three-dimensional (3D) pile driving noise model is validated with measurement data from offshore sites with a dedicated bathymetry. The model is based on a FE modelling approach for the close-range and a 3D PE model for the far-range. The measurements were conducted with two different noise mitigation measures. The method of including these measures into the PE model as well as the influence of bathymetry-induced 3D effects on the sound pressure levels are presented.
|URI:||http://hdl.handle.net/11420/11464||ISSN:||1939-800X||Institute:||Modellierung und Berechnung M-16||Document Type:||Chapter/Article (Proceedings)|
|Appears in Collections:||Publications without fulltext|
Show full item record
checked on Jan 20, 2022
Add Files to Item
Note about this record
Cite this record
Items in TORE are protected by copyright, with all rights reserved, unless otherwise indicated.