Please use this identifier to cite or link to this item:
https://doi.org/10.15480/882.2256
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Scheider, Ingo | - |
dc.contributor.author | Xiao, Tao | - |
dc.contributor.author | Yilmaz, Ezgi D. | - |
dc.contributor.author | Schneider, Gerold A. | - |
dc.contributor.author | Huber, Norbert | - |
dc.contributor.author | Bargmann, Swantje | - |
dc.date.accessioned | 2019-06-04T09:31:32Z | - |
dc.date.available | 2019-06-04T09:31:32Z | - |
dc.date.issued | 2015-12 | - |
dc.identifier.citation | Acta biomaterialia (15): 244-253 (2015) | de_DE |
dc.identifier.issn | 1742-7061 | de_DE |
dc.identifier.uri | http://hdl.handle.net/11420/2669 | - |
dc.description.abstract | Dental enamel is a highly anisotropic and heterogeneous material, which exhibits an optimal reliability with respect to the various loads occurring over years. In this work, enamel's microstructure of parallel aligned rods of mineral fibers is modeled and mechanical properties are evaluated in terms of strength and toughness with the help of a multiscale modeling method. The established model is validated by comparing it with the stress-strain curves identified by microcantilever beam experiments extracted from these rods. Moreover, in order to gain further insight in the damage-tolerant behavior of enamel, the size of crystallites below which the structure becomes insensitive to flaws is studied by a microstructural finite element model. The assumption regarding the fiber strength is verified by a numerical study leading to accordance of fiber size and flaw tolerance size, and the debonding strength is estimated by optimizing the failure behavior of the microstructure on the hierarchical level above the individual fibers. Based on these well-grounded properties, the material behavior is predicted well by homogenization of a representative unit cell including damage, taking imperfections (like microcracks in the present case) into account. | en |
dc.language.iso | en | de_DE |
dc.publisher | Elsevier | de_DE |
dc.relation.ispartof | Acta biomaterialia | de_DE |
dc.rights | CC BY-NC-ND 3.0 | de_DE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/3.0/ | de_DE |
dc.subject | dental enamel | de_DE |
dc.subject | mechanical characterization | de_DE |
dc.subject | micromechanical modeling | de_DE |
dc.subject | hierarchical material | de_DE |
dc.subject | homogenization | de_DE |
dc.subject.ddc | 500: Naturwissenschaften | de_DE |
dc.title | Damage modeling of small-scale experiments on dental enamel with hierarchical microstructure | de_DE |
dc.type | Article | de_DE |
dc.identifier.urn | urn:nbn:de:gbv:830-882.034877 | - |
dc.identifier.doi | 10.15480/882.2256 | - |
dc.type.dini | article | - |
dc.subject.ddccode | 500 | - |
dc.subject.ddccode | 570 | - |
dcterms.DCMIType | Text | - |
tuhh.identifier.urn | urn:nbn:de:gbv:830-882.034877 | - |
tuhh.oai.show | true | de_DE |
tuhh.abstract.english | Dental enamel is a highly anisotropic and heterogeneous material, which exhibits an optimal reliability with respect to the various loads occurring over years. In this work, enamel's microstructure of parallel aligned rods of mineral fibers is modeled and mechanical properties are evaluated in terms of strength and toughness with the help of a multiscale modeling method. The established model is validated by comparing it with the stress-strain curves identified by microcantilever beam experiments extracted from these rods. Moreover, in order to gain further insight in the damage-tolerant behavior of enamel, the size of crystallites below which the structure becomes insensitive to flaws is studied by a microstructural finite element model. The assumption regarding the fiber strength is verified by a numerical study leading to accordance of fiber size and flaw tolerance size, and the debonding strength is estimated by optimizing the failure behavior of the microstructure on the hierarchical level above the individual fibers. Based on these well-grounded properties, the material behavior is predicted well by homogenization of a representative unit cell including damage, taking imperfections (like microcracks in the present case) into account. | de_DE |
tuhh.publisher.doi | 10.1016/j.actbio.2014.11.036 | - |
tuhh.publication.institute | Kontinuums- und Werkstoffmechanik M-15 | de_DE |
tuhh.publication.institute | Keramische Hochleistungswerkstoffe M-9 | de_DE |
tuhh.identifier.doi | 10.15480/882.2256 | - |
tuhh.type.opus | (wissenschaftlicher) Artikel | - |
tuhh.institute.german | Keramische Hochleistungswerkstoffe M-9 | de |
tuhh.institute.english | Keramische Hochleistungswerkstoffe M-9 | de_DE |
tuhh.gvk.hasppn | false | - |
openaire.rights | info:eu-repo/semantics/openAccess | de_DE |
dc.type.driver | article | - |
dc.type.casrai | Journal Article | - |
tuhh.container.volume | 15 | de_DE |
tuhh.container.startpage | 244 | de_DE |
tuhh.container.endpage | 253 | de_DE |
dc.relation.project | SFB 986: Teilprojekt B4 - Mikromechanisches Materialverhalten hierarchischer Werkstoffe | de_DE |
dc.relation.project | Untersuchung des Deformations- und Bruchverhaltens der hierarchischen Ebenen von Zahnschmelz | de_DE |
dc.rights.nationallicense | false | de_DE |
dc.identifier.scopus | 2-s2.0-84922754089 | - |
local.status.inpress | false | de_DE |
datacite.resourceType | Journal Article | - |
datacite.resourceTypeGeneral | Text | - |
item.mappedtype | Article | - |
item.openairetype | Article | - |
item.languageiso639-1 | en | - |
item.grantfulltext | open | - |
item.cerifentitytype | Publications | - |
item.creatorOrcid | Scheider, Ingo | - |
item.creatorOrcid | Xiao, Tao | - |
item.creatorOrcid | Yilmaz, Ezgi D. | - |
item.creatorOrcid | Schneider, Gerold A. | - |
item.creatorOrcid | Huber, Norbert | - |
item.creatorOrcid | Bargmann, Swantje | - |
item.creatorGND | Scheider, Ingo | - |
item.creatorGND | Xiao, Tao | - |
item.creatorGND | Yilmaz, Ezgi D. | - |
item.creatorGND | Schneider, Gerold A. | - |
item.creatorGND | Huber, Norbert | - |
item.creatorGND | Bargmann, Swantje | - |
item.fulltext | With Fulltext | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
crisitem.project.funder | Deutsche Forschungsgemeinschaft (DFG) | - |
crisitem.project.funder | Deutsche Forschungsgemeinschaft (DFG) | - |
crisitem.project.funderid | 501100001659 | - |
crisitem.project.funderid | 501100001659 | - |
crisitem.project.funderrorid | 018mejw64 | - |
crisitem.project.funderrorid | 018mejw64 | - |
crisitem.project.grantno | 192346071 | - |
crisitem.project.grantno | SCHN 372/18-2 | - |
crisitem.author.dept | Keramische Hochleistungswerkstoffe M-9 | - |
crisitem.author.dept | Keramische Hochleistungswerkstoffe M-9 | - |
crisitem.author.dept | Werkstoffphysik und -technologie M-22 | - |
crisitem.author.dept | Kontinuums- und Werkstoffmechanik M-15 | - |
crisitem.author.orcid | 0000-0001-5780-6249 | - |
crisitem.author.orcid | 0000-0002-4252-9207 | - |
crisitem.author.orcid | 0000-0001-7403-7066 | - |
crisitem.author.parentorg | Studiendekanat Maschinenbau | - |
crisitem.author.parentorg | Studiendekanat Maschinenbau | - |
crisitem.author.parentorg | Studiendekanat Maschinenbau | - |
crisitem.author.parentorg | Studiendekanat Maschinenbau | - |
Appears in Collections: | Publications with fulltext |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
1-s2.0-S174270611400539X-main.pdf | Verlag-PDF | 1,86 MB | Adobe PDF | View/Open![]() |
Page view(s)
357
Last Week
1
1
Last month
6
6
checked on Feb 3, 2023
Download(s)
200
checked on Feb 3, 2023
SCOPUSTM
Citations
26
Last Week
0
0
Last month
0
0
checked on Jun 30, 2022
Google ScholarTM
Check
Note about this record
Cite this record
Export
This item is licensed under a Creative Commons License