|Publisher DOI:||10.1039/c5tc03260a||Title:||Yttria-stabilized zirconia microspheres: Novel building blocks for high-temperature photonics||Language:||English||Authors:||Leib, Elisabeth W.
Pasquarelli, Robert M.
Rosário, Jefferson J. do
Dyachenko, Pavel N.
Schneider, Gerold A.
|Issue Date:||2-Nov-2015||Publisher:||Royal Society of Chemistry (RSC)||Source:||Journal of Materials Chemistry C 1 (4): 62-74 (2016)||Abstract (english):||
Zirconia-based ceramics cover a huge variety of applications, including refractories, electro- and bioceramics, fuel cells, catalysts, and many more. For various photonic applications considered for energy systems and heat management, zirconia microspheres are interesting building blocks due to their high refractive index, as well as their chemical and mechanical robustness. However, instabilities caused by thermally-induced phase transitions and grain growth at temperatures above ∼1000 °C preclude high-temperature applications of pure zirconia particles. Here, we present a synthetic route for yttria-stabilized zirconia microparticles with significantly improved thermal stability. With these particles we conducted the first study on their thermal stability as a function of the yttrium content and at temperatures up to 1500 °C. Using X-ray diffraction and scanning electron microscopy, the optimum Y content was determined to be 8-10%, which was marked by stabilization of the tetragonal or cubic phase and significantly attenuated grain growth. Furthermore, with diameters ranging from 2 to 5 μm, the particles covered a size range perfectly suited for photonic applications in the IR spectral range. To demonstrate this, photonic glass coatings were prepared with these particles and their IR reflectivity and microstructural stability was studied after subjecting them to various heating cycles. While heating beyond 1200 °C led to failure and delamination of undoped particle films, films doped with 6 and 10% Y displayed quite stable broadband IR reflection of up to 80% in the wavelength range from 1-5 μm, even after prolonged heating at 1400 °C. A detailed analysis of the X-ray diffraction patterns revealed that prolonged heating at 1400 °C resulted in phase decomposition due to Y segregation into Y-lean and Y-rich domains, confirming the presence of the solute-drag effect.
|URI:||http://hdl.handle.net/11420/2795||DOI:||10.15480/882.2286||ISSN:||2050-7534||Journal:||Journal of materials chemistry||Institute:||Keramische Hochleistungswerkstoffe M-9
Optische und Elektronische Materialien E-12
|Document Type:||Article||Project:||SFB 986: Teilprojekt C2 - Keramikbasierte hochtemperaturstabile Wärmestrahlungsreflektoren und Strukturfarben
SFB 986: Teilprojekt C4 - Deposition, Ordnung und mechanische Stabilität von Beschichtungen aus assemblierten Partikeln mit enger Größenverteilung
SFB 986: Teilprojekt C5 - Oxidische Hochtemperatur-Schutzschichtsysteme mittels angepasster Porenstruktur
|License:||CC BY-NC 3.0 (Attribution-NonCommercial)|
|Appears in Collections:||Publications with fulltext|
Show full item record
Files in This Item:
|c5tc03260a.pdf||Verlags-PDF||4,42 MB||Adobe PDF||View/Open|
checked on May 28, 2023
checked on May 28, 2023
checked on Jun 30, 2022
Note about this record
Cite this record
This item is licensed under a Creative Commons License