2 results
Now showing1 - 2 of 2
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Comprehensive study of 3D liquid flow fields in additively manufactured structures for SMART reactors using large-scale vertical magnetic resonance imaging and computational fluid dynamics(Elsevier, 2026-04-24); ; ; ; Triply Periodic Minimal Surface (TPMS) structures have emerged as a new class of porous materials with variable geometries and favourable transport properties, making them promising for reactor internals in chemical engineering. However, experimental data on internal TPMS flow behaviour are still limited. To address this gap, the flow behaviour in additively manufactured TPMS structures is analysed using three-dimensional Magnetic Resonance Imaging (MRI) velocimetry in a large-bore vertical 3 T MRI system, in cylindrical columns of 38 mm diameter and Reynolds numbers between 50 and 300. Three different TPMS geometries are investigated, and consistency between Computational Fluid Dynamics (CFD) simulations and experimentally measured MRI velocity fields is established through cross-validation. The MRI system provides fully three-dimensional velocity fields with a divergence deviation below 6 %. MRI revealed distinct flow features: the Gyroid TPnS exhibited pronounced channelling, while the Schwarz-Diamond TPSf showed merge-split behaviour, achieving a 46 % increase in lateral mixing compared to the Gyroid TPnS structures. Numerical simulations reproduce the flow features and show agreement with the MRI data. The combined methodology demonstrates the suitability of MRI velocimetry for the experimental validation of CFD simulations and establishes a robust foundation for future studies of heat and mass transfer, as well as reactive flow, in structured reactor systems.Publicationtype: Journal Article68 85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Trajectory-based breakup modelling for dense bubbly flowsA new model to predict the breakup of gaseous bubbles in a continuous liquid phase is developed. In the model each bubble is modelled as a spring–damper system, namely a Kelvin–Voigt element, while the outer force is derived by a Lagrangian analysis determining the largest stretching rate of the flow field below. The developed model is based on physical principles and no further arbitrary parameters have to be adjusted. Each bubble is observed on its way through the bubbly flow individually, taking into account its history along its respective path. With the implemented model numerical simulations in a wide range of scales are conducted, ranging from the laboratory scale of a vessel of 3L to the large industrial scale of 15m3. The simplicity of the model allows for a good cost to benefit ratio. In the present work, the achieved results are compared to experimental data obtained from optical measurements in a replica of a 200L aerated stirred tank reactor for various stirrer frequencies.Publicationtype: Journal Article38 65