4 results
Now showing1 - 4 of 4
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Systematic study of the interplay between laser beam shape, energy input, and hatch spacing in PBF-LB/M of Ti-6Al-4V: experiments and numerical modeling(Elsevier, 2026-07-17); ; ; ; Programmable laser beam shaping tailors the spatial irradiance distribution in laser powder bed fusion (PBF-LB/M), enabling control over melt-pool geometry and defect formation. However, the coupled effects of beam shape, hatch spacing (track overlap), and energy input on densification and microstructural development remain insufficiently understood. Accordingly, Ti-6Al-4V is studied using single-track experiments, cube builds, and 3D transient multiphysics simulations across three ring-type beam profiles ranging from relatively core-weighted to strongly ring-dominated. Single tracks spanning a power–speed matrix (linear energy density, P/v) quantified melt-pool width, depth, and molten area and mapped stability regimes (fragmentation, necking, stable) and transition thresholds with increasing energy input. Cube specimens mapped relative density versus beam mode, areal energy density AEDh = P/(v h) (J/mm2), hatch spacing h, and geometric ratios h/d (d: effective beam diameter) and W/h (W: melt-pool width). Near-full density (~99.9%) was achieved for all profiles at AEDh ≥ 2.8–3.0 J/mm2; relatively more core-weighted profiles reached this at lower AEDh, whereas ringdominated profiles required higher input to suppress lack-of-fusion. Density dropped when h/d≳1, while W/h≳ 1.2 preserved high density. Microstructure and Vickers microhardness (HV0.2) were assessed across AEDh. All conditions exhibited martensitic α′ microstructures, and microhardness remained ≈360–395 HV0.2, converging once near-full density was reached. Simulations showed that ring-dominated density loss arises from insufficient inter-track remelting depth (cusp formation) despite lateral overlap, requiring higher overlap ratios for full fusion. Thermal gradients (G) and solidification rates (R) placed all cases in the columnar growth regime; higher G/R in more core-weighted profiles is consistent with stronger grain continuity than the more refined ringdominated structures.Publicationtype: Journal Article9 15 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Porosity and elevated-temperature tensile response of PBF-LB/M Ti-6Al-4V across laser beam profiles mapped using a spot-size-aware energy metricLaser beam shaping in PBF-LB/M modifies the spatial laser energy distribution, affecting melt-pool evolution, defect formation, and mechanical response. Ti-6Al-4V was processed using Gaussian, core–ring, and ring-dominated beam profiles. Measured beam maps were used to determine the effective beam diameter in a modified energy metric (VEDM, J mm⁻² s⁻¹/²) for cross-mode comparison. Densification and pore characteristics were assessed in cubes and tensile specimens. Core–ring and ring-dominated profiles transitioned from lack-of-fusion defects at low input to near-full density at higher input, whereas Gaussian shifted toward keyhole-type porosity at the highest input. At VEDM = 332 J mm⁻² s⁻¹ /², the µCT-scanned tensile gauge regions showed lower relative density for Gaussian (∼98.6%) than for core–ring and ring-dominated conditions (∼99.8%). Tensile specimens produced with Gaussian and ring-dominated beams were tested at RT, 200 °C, and 400 °C. All conditions showed temperature-dependent softening. However, at high VEDM and 400 °C, the ring-dominated condition retained higher ductility (∼10%) than the Gaussian condition (∼7%), while maintaining a comparable peak stress. Fractography showed pore-assisted initiation in the Gaussian condition and ductile tearing with pronounced necking in the ring-dominated condition. Overall, elevated-temperature tensile performance was primarily associated with pore type and severity, while VED<inf>M</inf> provides a practical framework for cross-mode comparison.Publicationtype: Journal Article11 10 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Advancing laser powder bed fusion of metals via tailored laser beam shaping: a critical reviewLaser beam shaping is increasingly explored to enhance Laser Powder Bed Fusion of Metals (PBF-LB/M) by controlling the spatial energy distribution within the laser spot. While conventional Gaussian beams remain widely used in commercial systems, their concentrated energy input can promote steep thermal gradients and localized overheating, which may restrict process stability, productivity, and part quality. This review critically synthesizes recent progress in laser beam shaping for PBF-LB/M, with emphasis on work from 2020 to early 2026. Compared with earlier reviews that mainly focused on optical implementation or broader laser–material processing concepts, this review integrates beam-shape generation with melt-pool dynamics, defect formation, surface quality, microstructural evolution, mechanical response, productivity, and emerging shape-aware process descriptors. The discussion shows how profiles such as core–ring, ring-dominant, top-hat, and elliptical beams can broaden stable process windows, suppress spatter and keyhole porosity, and promote more uniform thermal histories, with implications for surface quality, mechanical isotropy, and build efficiency. Modeling and simulation studies are also summarized to clarify the coupled heat-fluid–solid interactions controlling melt-pool behavior, thermal gradients, and solidification kinetics. Furthermore, major implementation challenges such as optical integration, energy-delivery stability, process reproducibility, and the lack of standardized beam descriptors are summarized. The review concludes by outlining emerging research directions aimed at enabling practical, reliable, and industrial-scale adoption of beam-shaping technologies in additive manufacturing.Publicationtype: Review Article15 23 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Broadening the microstructure regime of Al2O3–ZrO2 hypereutectic ceramic fabricated via laser powder bed fusion(KeAi Communications, 2024-02-29); ; ; ; The microstructure and mechanical property regime of laser powder bed fusion fabricated Al2O3–ZrO2 hypereutectic ceramic samples were thoroughly investigated by tailoring the printing parameters. The findings indicate that both the hypereutectic and eutectic microstructure are obtained depending on the varying printing parameters. The ZrO2 dendrites in the hypereutectic structure gradually refine as the laser energy density increases, while the surrounding eutectic structure evolves continuously. The uniform eutectic microstructure is developed until the dendrites disappear. Simultaneously, it is observed that coarse Al2O3 particles were formed in the overlap part of the eutectic structure where the laser energy is higher. In terms of mechanical properties, the samples with alumina particles in the eutectic microstructure have a maximum hardness of 1616.13 HV, while the sample with uniform eutectic microstructure has the highest fracture toughness of 5.87 MPa⋅m1/2. These findings can contribute to the introduction of a unique microstructure in Al2O3–ZrO2 ceramic.Publicationtype: Journal Article21 35