3 results
Now showing1 - 3 of 3
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: without files , A critical review on treatment of saline wastewater with emphasis on electrochemical based approaches(Elsevier, 2022-02); ; ; ; Increasing discharge of saline wastewater (SWW) from different industries and environmental risks associated with it has compelled researchers to search for efficient treatment methods and safe disposal techniques. Unfortunately, several industries such as agro-food, oil & gas, tannery, and pulp & paper require brine solution units to obtain a finished product that further elevates the salinity of discharged wastewater to a magnitude of 1-3% by weight of NaCl. Among the conventional treatment procedures, electrochemical technologies proved to be more efficient, robust and cost-effective. Electrocoagulation (EC), an electrochemical based technology that produces in situ coagulant which ultimately assist in pollutant removal. It is even more suitable for the treatment of saline water as salinity increases conductivity which further enhances the EC process efficiency. However, the elevated anodic dissolution may increase the cost which can be reduced by using scrap metals as sacrificial electrodes out of iron and aluminum. The mechanism of salt removal from SWW using EC is similar to other pollutant removal mechanisms as salt species being coagulated by the metal hydroxides and are further removed as sludge. However, optimization of process parameters in EC is essential to maintain a balance between anodic passivation and higher metal dissolution so as to make the process efficient. This review paper highlights the theory of the EC technology, process parameters, potential application and recent developments of EC for the treatment of various types of SWW as well as economical assessment associated with this technology. Most of the recent research concerning EC for SWW treatment has been concentrated on the pollutant-specific evaluation without paying special attention to the process optimization, process modelling and commercial usage. This review further outlines the challenges with the recommendations for encouraging research options that can potentially enhance the EC performance, lower the operational costs and expand its range of applications for SWW treatment.Publicationtype: Review Article85 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: without files , A critical review of state-of-the-art electrocoagulation technique applied to COD-rich industrial wastewaters(Springer, 2021-08); ; ; ; Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation, sedimentation, flotation, and electrochemical oxidation processes. Extensive research efforts implementing EC technology have been executed over the last decade to treat chemical oxygen demand (COD)-rich industrial wastewaters with the aim to protect freshwater streams (e.g., rivers, lakes) from pollution. A comprehensive review of the available recent literature utilizing EC to treat wastewater with high COD levels is presented. In addition, recommendations are provided for future studies to improve the EC technology and broaden its range of application. This review paper introduces some technologies which are often adopted for industrial wastewater treatment. Then, the EC process is compared with those techniques as a treatment for COD-rich wastewater. The EC process is considered as the most privileged technology by different research groups owing to its ability to deal with abundant volumes of wastewater. After, the application of EC as a single and combined treatment for COD-rich wastewaters is thoroughly reviewed. Finally, this review attempts to highlight the potentials and limitations of EC. Related to the EC process in batch operation mode, the best operational conditions are found at 10 V and 60 min of voltage and reaction time, respectively. These last values guarantee high COD removal efficiencies of > 90%. This review also concludes that considerably large operation costs of the EC process appears to be the serious drawback and renders it as an unfeasible approach for handling Electrocoagulation (EC) is one of the emerging technologies in groundwater and wastewater treatment as it combines the benefits of coagulation, sedimentation, flotation, and electrochemical oxidation processes. Extensive research efforts implementing EC technology have been executed over the last decade to treat chemical oxygen demand (COD)-rich industrial wastewaters with the aim to protect freshwater streams (e.g., rivers, lakes) from pollution. A comprehensive review of the available recent literature utilizing EC to treat wastewater with high COD levels is presented. In addition, recommendations are provided for future studies to improve the EC technology and broaden its range of application. This review paper introduces some technologies which are often adopted for industrial wastewater treatment. Then, the EC process is compared with those techniques as a treatment for COD-rich wastewater. The EC process is considered as the most privileged technology by different research groups owing to its ability to deal with abundant volumes of wastewater. After, the application of EC as a single and combined treatment for COD-rich wastewaters is thoroughly reviewed. Finally, this review attempts to highlight the potentials and limitations of EC. Related to the EC process in batch operation mode, the best operational conditions are found at 10 V and 60 min of voltage and reaction time, respectively. These last values guarantee high COD removal efficiencies of > 90%. This review also concludes that considerably large operation costs of the EC process appear to be the serious drawback and renders it as an unfeasible approach for handling of COD-rich wastewaters. In the end, this review has attempted to highlights the potentials and limitations of EC and suggests that vast research notably in the field of continuous flow EC system is essential to introduce this technology as a convincing wastewater technology.Publicationtype: Review Article138 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: with files , Energy Efficient Rapid Removal of Arsenic in an Electrocoagulation Reactor with Hybrid Fe/Al Electrodes: Process Optimization Using CCD and Kinetic Modeling(Multidisciplinary Digital Publishing Institute (MDPI), 2020-10-16); ; ; Threats due to insufficient, inadequate and costlier methods of treating contaminants such as arsenic have emphasized the significance of optimizing and managing the processes adopted. This study was aimed at the complete elimination of arsenic from an aqueous medium with minimum energy consumption using the electrocoagulation process. Arsenic removal around 95% was rapidly attained for optimized conditions having a pH of 7, 0.46 A current intensity, 10 mg/L initial concentration and only 2 min of applied time duration using the energy of 3.1 watt-hour per gram of arsenic removed. Low values of applied current for longer durations resulted in the complete removal of arsenic with low energy consumption. Various hydroxide complexes including ferrous hydroxide and ferric hydroxide assisted in the removal of arsenic by adsorption along with co-precipitation. Surface models obtained were checked and found with a reasonably good fit having high values of coefficient of determination of 0.933 and 0.980 for removal efficiency and energy consumption, respectively. Adsorption was found to follow pseudo-first-order kinetics. Multivariate optimization proved it as a low-cost effective technology having an operational cost of 0.0974 Indian rupees (equivalent to USD 0.0013) per gram removal of arsenic. Overall, the process was well optimized using CCD based on response surface methodology.Publicationtype: Journal ArticleScopus© Citations 27 157 195