Now showing1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Project,
    Form- und Topologieoptimierung unter nichtlinearer Unsicherheit
    This research project addresses structural optimization under uncertainty for large-scale problems with a large number of random variables. Many methods for probabilistic analysis (e.g. Monte Carlo methods, numerical integration, surrogate models) usually scale with the number of random variables, which leads to an impracticable computation time for high-dimensional problems. To overcome this problem, methods based on first-order Taylor approximations are used, which require only two function evaluations, regardless of the number of design or random variables. However, the low order of this approximation often leads to inaccurate results, which means that optimizations under uncertainty may hardly differ from deterministic optimizations. In many applications, the computing time is dominated by finite element analyses, while the preprocessing - for example the calculation of the Young's modulus from element densities in topology optimization - is almost negligible. On the other hand, these preprocessing steps often contain highly nonlinear functions that are implicitly linearized in the first-order Taylor approximation and thus contribute to significant inaccuracies in the probabilistic analysis. The new approach of the project consists of first calculating the stochastic moments of suitably selected intermediate parameters from the scattering input data and then performing the probabilistic analysis only from these intermediate parameters using first-order Taylor approximation. A simple example of this is the consideration of an uncertain projection parameter, from which the stochastic properties of the Young's modulus are calculated. This Young's modulus is then used as the new random parameter. This avoids errors caused by linear approximations in preprocessing. Since the preprocessing only requires a small computation time, the calculation of the stochastic moments of the intermediate parameters can be carried out efficiently. Hence, the additional computational effort remains manageable. The aim of the work is the development of analytical conversions from scattering primary variables to scattering intermediate parameters or, if this is not possible, the search for good approximations. The aspect of scalability is of crucial importance. The developed approach is to be applied to scattering load angles, projection parameters, material orientations of anisotropic materials and uncertain node coordinates.
      6
  • Some of the metrics are blocked by your 
    Item type:Project,
      15
  • Some of the metrics are blocked by your 
    Item type:Project,
    Integrated structural optimization and model-informed path planning of additively manufactured, continuous fiber-reinforced plastics, taking into account manufacturing restrictions and design-dependent strength
    For structures with complex fiber architecture, the transfer of a fiber composite design into the path planning of an additive manufacturing process in particular has been a mostly manual process to date. For example, the result of optimizing a fiber composite structure is available in the form of a vector field of local material orientations. Manual path planning is then used to implement a component that comes close to this design. Today, there is no approach for optimizing additively manufactured composite components made of continuous fibers in such a way that a manufacturable design is created and at the same time its full lightweight potential is exploited. The weak point here is the transition between the structural-mechanical model, path planning and the manufacturing process, which is why a continuous design chain can only be developed in close cooperation between structural optimization and manufacturing technology. The overarching aim of this application is therefore to develop a continuous process for model-informed path planning and structural optimization of additively manufactured fibre composite components. The path planning should anticipate and compensate for process-induced sources of error through simulation, control and modeling of the non-planar production and the fiber-matrix combination. In addition, the design-dependent, local strength and manufacturing restrictions are to be taken into account in the optimization. To this end, a method for error-compensating path planning with model-based process parameters is being developed and a fused filament fabrication process for the non-planar additive manufacturing of fiber-reinforced plastic composites is adapted to it. The paths determined in this way are the input for a method to be developed for the structural optimization of fiber paths while maintaining manufacturability and taking into account design-dependent strengths and stiffnesses. This overall process is to be validated by production trials and structural-mechanical tests.
      10
  • Some of the metrics are blocked by your 
    Item type:Project,
    Structural optimization for fail-safe designs by machine learning
    In certain industries like the aerospace industry safety-critical components have to be designed so that they are damage tolerant. One way to ensure damage tolerance is a fail-safe design which is able to sustain the applied load even if one structural member/load path fails. The requirement for fail-safety can be embedded into design optimization as a constraint. However, the computational cost of solving such an optimization problem is too expensive to apply this approach to problems of industrial relevance. Especially in the context of topology optimization, which provides the highest design freedom, the number of simulations that need to be run in order to account for all damage scenarios is extremely high. The structures which result from such topology optimizations have similar global load paths as structures that are optimized without consideration of fail-safety. However, the fail-safe designs have multiple struts along the load paths and more connecting elements. One fast and practicable approach is to run an optimization without consideration of fail-safety to determine the main load paths. Then, based on the experience of the design engineer, a design with redundant load paths is derived. This design process is obviously dependent on the experience of the designer. This is a problem especially for topology optimization due to the large amount of possible solutions. The objective of the current proposal is to replace the engineering experience by an artificial neural network. For that, a large number of combinations of different design spaces, boundary conditions and loads is considered. For each combination, a “plain” topology optimization as well as a topology optimization considering fail-safety is performed. The obtained topologies serve as data for training an artificial neural network. When designing a new structure, only a topology optimization without consideration of fail-safety shall be conducted. The obtained topology is the input for the already trained artificial neural network, which then suggests a redundant topology. Afterwards, this topology is fine-tuned with a fast shape optimization approach. While existing approaches for topology optimization considering fail-safety regard the compliance as objective function, the current proposal also addresses eigenfrequencies. Here, the classical maximization of the minimum eigenfrequency is considered as objective as well as minimizing the change of eigenfrequencies in case of partial failure.
      33